Шестерни понижающие РК 3.05 55% и повышающие 1.08 8% Gearmaster MFK1194LTR для Toyota Land Cruiser Prado 78 71

Шестерни понижающие РК 3.05 55% и повышающие 1.08 8% Gearmaster MFK1194LTR для Toyota Land Cruiser Prado 78 71

This gear set is to suit 5 speed models 10/1984 onwards with a 38 mm diameter idler shaft

• FJ##
• HJ##
• BJ##
• HZJ7#

Does NOT suit these Land Cruiser models:

• FZJ7#
• HDJ7#
• VDJ7#

HIGH RANGE ratio 1.08:1 or 8 Percent Under drive

This ratio is ideal for vehicles fitted with 35" or larger tyres requiring an increase in engine revs to regain lost on road performance. 35" tyres will give approximately 20% reduction in engine revs. If your vehicle is fitted with 35" tyres and a 4-speed gearbox behind an F, B or H series engine the under drive will give you an increase in engine revs of approximately 180 RPM at 100 KPH or 2420 RPM instead of 2240 RPM.

Alternatively, if your vehicle is fitted with 35" tyres and a 5-speed gearbox behind a 2F, B, 2H or 1HZ series engine. The under drive will give you an increase in engine revs of approximately 151 RPM at 100 KPH or 2043 RPM instead of 1892 RPM.

Alternatively, if your vehicle is fitted with 35" tyres and a 5-speed gearbox behind a 3F, or HD series engine. The under drive will give you an increase in engine revs of approximately 157 RPM at 100, KPH or 2129 RPM instead of 1972 RPM.

LOW RANGE ratio 3.05:1 or 55% Reduction

Multiply this 3.05:1 by the 1st gear ratio of 4.843:1 and the differential ratio of 4.11:1 will give you a final drive ratio of 60.7:1 which is a vast improvement on the standard final drive ratio of 36.1:1.

The extra low range transforms your Toyota into an unstoppable off road machine.

Vehicles fitted with automatic transmissions, standard or other wise can also take advantage of the extra low gearing in low range as a dramatic improvement in engine braking is achieved giving much improved off road performance and increased safety.

Kit contains:

• Input gear
• Idler gear
• Low range output gear
• High range output gear
• Output gear bearings
• Idler gear tapered bearings
• Idler shaft
• Spacers
• Orings
• Lock washer
• Lock Nut
• Instructions