Главная пара 5.29 Trail-Creeper 301454-1 Super Finish для Toyota Land Cruiser Prado 78 8" HP передняя
Дифференциал: Toyota 8" реверсивный с верхним расположением хвостовика
Передаточное число ГП: 5.29
Кол-во зубов: 37-7
Кол-во шлицов на ведущей шестерне: 27
Кол-во болтов ГП: 10
Подходит для автомобилей:
- 1990-1997 Toyota Land Cruiser 80 HDJ80 HZJ80 FJ80 FZJ80
- 1987-1996 Toyota Land Cruiser Prado 70 II Bundera LJ71/LJ72/LJ78 KZJ71/KZJ78 RJ70
- 1990-1999 Toyota Land Cruiser 70 BJ70 HZJ70 PZJ70
- 1999-2015 Toyota Land Cruiser 79 HZJ79 HDJ79 FZJ79 GRJ79
- 1998-2007 Toyota Land Cruiser 105 HZJ105 FZJ105
- 1998-2007 Toyota Land Cruiser 100 UZJ100 FZJ100 HDJ100 Cygnus
- 1996-1998 Lexus LX450
- 1999-2007 Lexus LX470
Trail-Creeper Super Finish Ring & Pinions
Tired of waiting for your ring and pinions to break-in before towing or hitting the trail? Trail-Gear has your solution with our new Trail-Creeper™ Super Finish Ring & Pinion Gears. Our Trail-Creeper™ Super Finish Ring & Pinion Gears require absolutely no break-in time. You can install these gears and get right into the action without the need to worry about premature ring and pinion failure.
Trail-Creeper™ Super Finish Ring & Pinion Gears are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance. The gear teeth are cut using Gleason CNC hobbing machines & cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.
- No break-in period
- Less friction
- Reduced wear allowing bearings and gears to last longer
Trail-Creeper™ Super Finish Ring & Pinion Gears are treated with REM® Isotropic Super Finishing (ISF®) process. The process that is used to polish our gears is the same used for aerospace applications. The REM® Isotropic Super Finishing (ISF ®) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.
The REM® Isotropic Super Finishing (ISF®) process not only decreases friction and wear in the gears, but it creates a non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements.
REM® and ISF® are registered trademarks of REM Chemicals, Inc. All Rights Reserved.