Блокировки дифференциала на все внедорожники
Блокировка дифференциала и главная пара на любой внедорожник!
Пневматические блокировки TJM Pro Locker Пневматические блокировки ARB Air Locker Блокировки Eaton Detroit Truetrac и Detroit Locker Главные пары Nitro gear и усиленные ШРУСы и полуоси Усиленные полуоси и ШРУСы Trail gear Главные пары Yukon gear и блокировки Grizzly Locker Главные пары HF Standard gear и блокировки HF Air Locker
        Магазин:
+7 984 2-200-100
Связаться по WhatsappСвязаться в Telegram     Мастерская:  +7 914 790-98-73
(пусто)
 
Магазин "Blokirovka.ru"
Адреса: 
Магазин во Владивостоке
ВладивостокДнепровская, 25Д  (+7-984-2-200-100)
      E‑mail: info@blokirovka.ru

Шестерни повышающие 5-ю передачу МКПП Gearmaster MFK730 для Nissan Safari 60 61 Patrol GQ GU

120 000 руб.
Вес продукта: 5 кг

NISSAN OVERDRIVE 5TH GEAR SET

Part#: MFK730

Overdrive 5th Gears to suit Nissan 5 speed manual gearbox

  • GQ & GU Patrol
  • Y60 &Y61 Safari

All models (excluding 2.8ltr diesel and 3ltr petrol)

These gears have been designed to directly replace the Nissan Patrol 5-speed overdrive gears as fitted to all models from 1988 on (excluding the 2.8ltr diesel 5-speed gear box and the 3ltr petrol 5-speed gear box)

Marks4wd new 5th gear ratio's are as follows:

Original 5th GQ and GU .84: 1 Gearmaster Nissan 5th .74: 1 = 10% reduction in engine revs over standard
Original 5th GU 4.5ltr .91: 1 Gearmaster Nissan 5th .74: 1 = 15% reduction in engine revs over standard
Original 5th GU 4.8ltr .88: 1 Gearmaster Nissan 5th .66: 1 = 25% reduction in engine revs over standard


Nissan updated all GU Patrols as of 08/2004 with a longer spline main shaft and 5th gear.

This modification was done to prevent them from wearing out the main shaft and 5th gear spline which was found to be to small for the heavy loads that the vehicles where expected to haul.

The new Gearmaster gears have been designed with this improvement in mind.

Early model Nissans with the short spline 5th gear can be fitted with the new gear provided the spline is in good condition.

A shorter spacer which fits between the gear and the circlip on the main shaft is required.

The gears can be fitted with the gearbox in the vehicle, however the transfer case does have to be removed. Installation is relatively simple allowing the job to be undertaken by most mechanical work shops.

P.S. В комплекте с "Main shaft spacer to suit MFK730 kit Part#: 32527-VB100"

Есть вопросы? Спросить на WhatsappСпросить на WhatsApp

     по E-mail: показать форму и задать вопрос

Каталог