Блокировки дифференциала на все внедорожники
Блокировка дифференциала и главная пара на любой внедорожник!
Пневматические блокировки TJM Pro Locker Пневматические блокировки ARB Air Locker Блокировки Eaton Detroit Truetrac и Detroit Locker Главные пары Nitro gear и усиленные ШРУСы и полуоси Усиленные полуоси и ШРУСы Trail gear Главные пары Richmond gear и блокировки Powertrax Lockright Главные пары Yukon gear и блокировки Grizzly Locker Главные пары USA Standard gear и блокировки Spartan Locker
        Магазин:
+7 (984) 2-200-100 (Виталий)
+7 (914) 792-23-13 (Андрей)
+7 (984) 2-200-100
г.Владивосток, ул.Волховская, 25, СТО "4x4"
Мастерская:
+7 (914) 790-98-73
г.Владивосток, ул.Днепровская, 25д
(пусто)
 
Магазин "Blokirovka.ru"    Телефон: 
+7-984-2-200-100 (Магазин)
+7-914-792-23-13 (Андрей, whatsapp)
+7-902-557-64-17 (Виталий)
+7-984-2-200-100
    E‑mail: info@vl4x4.ru

Усиленные кулаки Marks 4WD Adaptors для Toyota Land Cruiser 78 79 80 100

GM-MFK1885SH
GM-MFK1885SH
200 000 руб.
200000
RUB
http://schema.org/NewCondition
http://schema.org/InStock

Land Cruiser HEAVY DUTY SWIVEL HOUSINGS MFK1885SH

To Suit Land Cruiser - Live Axle:

  • 78 Series
  • 79 Series
  • 80 Series
  • 100 Series

Marks 4WD Adaptors now manufacture a race spec, heavy duty, one piece Toyota Land Cruiser swivel housing / steering arm. The housing is machined to accept the ABS wheel speed sensors should they be fitted to your vehicle.The new swivel housing has been designed for maximum strength without introducing any new serviceable parts such as the king pin bearings and seals. When fitting, a standard front end rebuild kit is used.

The steering arms and the swivel housing have been cast as one piece. This design eliminates the four stud and collet design in the lower king pin housing which are notorious for coming loose when the vehicle is used in harsh off road conditions.

The housings have been designed to suit left or right hand drive vehicles.

The housing is made from heat treated cast SGI. The housings are fully machined leaving a small machining allowance on the bores and faces. They are then heat treated which also stress relieves them prior to the final machining operation.

The lower king pin bearing has been relocated into the swivel housing which increases the distance between the king pin bearings by 30mm, this adds a substantial amount of strength by decreasing the load on the bearings.

The original Toyota shims are used to set the king pin bearing preload.

Есть вопросы?

показать форму и задать вопрос

Каталог