Усиленные полуоси и ШРУСы Trail Gear 300753-3-KIT для Suzuki Jimny JB31 Samurai SJ413 26-33-26 шлица
|
79 000 руб.
Вес продукта: 10 кг
Кол-во:
|
Longfield™ Samurai 33-Spline Front Axle Kit
Гарантия производителя распространяется только на дефекты при производстве и в материалах, которые можно выявить визуально и измерениями до установки комплекта, либо выявить экспертизой в процессе эксплуатации.
Также рекомендуем внимательно читать инструкцию по установке - перед установкой необходимо максимально вытянуть полуось из ШРУСа, в противном случае шлицы полуоси могут иметь недостаточное зацепление со шлицами редуктора и их провернет, что не является гарантийным случаем.
The Longfield™ Samurai 33-Spline Front Axle shafts are made out of 4340 chromoly steel. The Longfield™ birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. The internals of our Longfield™ birfields are made out of 4340 chromoly steel and then dual heat-treated for superior strength. The axle shafts are also made out of 4340 chromoly steel. The shafts have a larger diameter than stock and are upgraded to 26-splines on the differential side. The Birfield side of the axle shaft and the inner race of the Birfield have been upgraded to 33-splines to better distribute the torque loading.
Kit Includes:
- Birfields
- Front axles
- C-clips
Note: To install The Longfield™ Samurai 33-Spline Front Axle Kit you will need 26 spline spider gears in your 3rd member. You can obtain these 26 spline spider gears either by purchasing the OEM rear axle spider gears (they are 26 spline stock in the rear third) or by simply purchasing a locker with 26 spline spider gears, which is common in this application.
Axle Shaft Dimensions
| P/N |
Description |
Length |
| 300751-3 |
Samurai Inner Axle Shaft, Short |
14-7/8" |
| 300752-3 |
Samurai Inner Axle Shaft, Long |
27-11/16" |
Application Data
- 1986-1995 Suzuki Jimny JB31
- 1986-1995 Suzuki Samurai SJ413
Инструкция
|
Мастерская: +7 914 790-98-73
